Installation Advice For Tubular Handrail

Glass Balustrade Installation With Handrail Bracket

For this stainless steel balustrade installation you might need a few toll as follows: tape measure, screws, Screwing tool, drill.

We recommend 1-meter stainless steel handrail will be used 2 handrail bracket to connect the railing tube and the tempered glass.

Frameless Glass Handrail Installation

  1. First of all, put the handrail bracket into the hole of tempered glass, then tighten the handrail bracket base with screws. The hole could be in the middle of the glass or at the four corners of the glass. Maximum thickness of tempered glass is 21.75mm.

     

  2. Drill the corresponding two holes in the handrail tube, position the tube above the stainless steel bracket with the screws. The material for the stainless steel tube is 304 and 316L, satin finish and mirror finish is available.
  3. Drill the corresponding two holes in the handrail tube, position the tube above the stainless steel bracket with the screws. The material for the stainless steel tube is 304 and 316L, satin finish and mirror finish is available.

  4. You can set the handrail size according to your needs. The general height of 1100m is for flat installation and 900mm is for the stair. The final rendering is as follows:

 

 

Leave a Reply

Your email address will not be published. Required fields are marked *